(2-1) Detaching and refitting the fuser unit
Procedure
1. Open the rear cover.
2. Release two hooks of the rear left cover
while pulling forward.
3. Remove the rear left cover by rotating.
(50/60 ppm model only)
(1)Remove the screw and then the ground-
ing wire.
(2)Open the connector cover and then
remove three connectors.
Hooks
Grounding wire
Connector cover
Rear cover
1-5-44
2NM/2NX/2NY/2NZ/2P0/2P6
Rear left cover
Figure 1-5-72
Screw
Figure 1-5-73
Connectors