Detaching And Refitting The Separation Needle Holder - Kyocera ECOSYS M3040dn Service Manual

(1-2) Detaching and refitting the separation needle holder

Procedure
1. Remove the transfer roller unit.
2. Release four hooks of separation nee-
dle unit by rotating and then remove the
separation needle unit upward.
3. Check or replace the separation needle
unit and refit all the removed parts.
Caution: Check certainly being fixed at the
time of attachment.
Separation needle unit
Hooks
Figure 1-5-65
1-5-39
2NM/2NX/2NY/2NZ/2P0/2P6