U203/Chk Dp Ope - Kyocera ECOSYS M3040dn Service Manual

U203 Chk DP Ope
Description
Simulates the original conveying operation separately in the DP.
Purpose
To check the DP operation.
Method
1. Press the start key.
2. Place an original in the DP if running this simulation with paper.
3. Select the speed to be operated.
Display
Normal Speed
High Speed
4. Select the item to be operated.
Display
CCD ADP(Non-P)
CCD ADP
CCD RADP(Non-P)
CCD RADP
5. Press the start key. The operation starts.
6. To stop continuous operation, press the stop key.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Normal reading
High-speed reading
Without paper, single-sided original of CCD
(continuous operation)
With paper, single-sided original of CCD
Without paper, double-sided original of CCD
(continuous operation)
With paper, double-sided original of CCD
1-3-39
2NM/2NX/2NY/2NZ/2P0/2P6
Description
Description