List Of Jam Code - Kyocera ECOSYS M3040dn Service Manual

List of JAM Code

Code
0000 Initial jam
0100 Secondary feeding timeout
0101 Wait for ready of print-process
package
0104 Wait for ready of conveying
package
0105 Driving prevention
0106 Paper feeding request for
duplex printing time out
0107 Wait for ready of fuser pack-
age
0110 Rear cover open
0111 Top cover open
0120 Receiving a duplex paper
feeding request while paper is
empty
0121 Exceeding number of duplex
pages circulated
0501 No paper feed of jam
0502
0503
0504
0505
0508
0509
Contents
The power is turned on when a sensor in the con-
veying system is on.
Secondary paper feed request given by the con-
troller is unreachable.
Process package won't become ready.
Conveying package won't become ready.
A drive does not stop.
Paper feeding request for duplex printing given by
the controller is unreachable.
Fuser package won't become ready.
The rear cover is opened during printing.
The top cover is opened during printing.
Paper feed request was received from the duplex
section despite the absence of paper in the
duplex section.
The controller issued the duplex section a request
for more pages than the duplex print cycle con-
tains.
The registration sensor 1 (RS1)*1 or sensor 3
(RS3)*2 does not turn on during paper feed from
cassette 1.
PF feed sensor 1 (PFFS1) does not turn on dur-
ing paper feed from cassette 2.
PF feed sensor 2 (PFFS2) does not turn on dur-
ing paper feed from cassette 3.
PF feed sensor 3 (PFFS3) does not turn on dur-
ing paper feed from cassette 4.
PF feed sensor 4 (PFFS4) does not turn on dur-
ing paper feed from cassette 5.
The registration sensor 1 (RS1)*1 or sensor 3
(RS3)*2 does not turn on during paper feed from
duplex section.
The registration sensor 1 (RS1)*1 or sensor 3
(RS3)*2 does not turn on during paper feed from
MP tray.
Conditions
1-4-3
2NM/2NX/2NY/2NZ/2P0/2P6
Jam
location*
H
H
H
H
H
B
-
I
-
-
I
I
1
2
3
4
5
I