Fusing Is Loose - Kyocera ECOSYS M3040dn Service Manual

(20) Fusing is loose.

Print example
Defective part
Paper
1
Paper weight set-
ting
2
Fuser unit
3
Check description
1. Check that the type of the
paper used falls within the
range of specifications.
2. Check the settings of the
type and weight of the paper.
Check If the weight of the paper
is correctly set.
Check the fuser pressure set-
ting.
1. If the type of the paper being used falls
outside the requirements, replace and use
a suitable type of paper.
2. If the settings made for the paper being
used is inadequate, configure the settings
according to the paper being used.
If the weight of the paper is not correctly set,
choose the correct weight that matches the
paper being used.
Replace the fuser unit. (see page 1-5-44)
1-4-93
2NM/2NX/2NY/2NZ/2P0/2P6
Corrective Action