Kyocera ECOSYS M3040dn Service Manual page 444

11. Pull out the cassette.
12. Remove three screws.
13. Release two hooks by sliding the right
lower cover upward and then remove
the right lower cover.
14. Remove eight screws and grounding
terminal.
15. Remove the controller box.
Hooks
Screw
Grounding
terminal
2-2-50
2NM/2NX/2NY/2NZ/2P0/2P6
Right lower cover
Screw
Figure 2-2-62
Screws
Screw
Controller box
Figure 2-2-63
Screw
Screw
Screw
Screw
Screw
Screw