U250
Mnt Cnt Pre-set
Description
Changes preset values for maintenance cycle.
Purpose
Provides changing the time when the message to acknowledge to conduct maintenance adjust-
ment is periodically displayed.
Setting
1. Press the start key.
2. Select the item to be set.
3. Change the setting using the +- keys or numeric keys.
Display
M.Cnt A
Clear
4. Press the start key. The value is set.
Clearing
1. Select [Clear].
2. Press the start key. The setting value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Description
Preset values for maintenance cycle A.
A value is cleared.
1-3-42
2NM/2NX/2NY/2NZ/2P0/2P6
Setting range
0 to 9999999
0