Detaching And Refitting The Fax Control Pwb (Fax Model Only) - Kyocera ECOSYS M3040dn Service Manual

(4) Detaching and refitting the FAX control PWB (FAX model only)

Procedure
1. Remove the upper interface cover.
2. Release two hooks using a flat screw
driver and remove the right stay cover.
3. Remove two screws and then pull the
FAX control PWB out.
4. Check or replace the FAX control PWB
and refit all the removed parts.
Upper
interface cover
Figure 1-5-168
Fax control PWB
Figure 1-5-169
1-5-98
2NM/2NX/2NY/2NZ/2P0/2P6
Right stay cover
Hooks
Flat screw driver
Screw
Screw