Kyocera ECOSYS M3040dn Service Manual page 57

Item
Section
No.
FAX U633 Comm Ctrl 4
U634 Comm Ctrl 5
U640 Comm Time 1
U641 Comm Time 2
U650 Modem 1
U651 Modem 2
U660 Set Calls
U670 Output List
U695 Custom FAX Func
U699 Set Soft SW
Content of maintenance item
It is whether communication by V.34 is per-
mitted, and transmission and reception -- it
sets up individually.
It is set up whether 3429 Hz in V.34 symbol
speed is used.
The number of times of reception of a DIS
signal is set up.
A RTN signal sending-out judging standard
(rate of an error line) is set up.
The judging standard of TCF is set up.
The detection time at the time of one shot
selection of a remote change is set up.
The detection time at the time of the contin-
uous selection of a remote change is set
up.
The timeout time at the time of FAX com-
munication is set up.
G3 cable equalizer is set up.
A modem disregard level is set up.
A modem outgoing level is set up.
A setup relevant to NCU (network control
unit) is carried out.
The list of the data relevant to facsimile
communication is outputted.
FAX package transmission is set up.
The output priority at the time of receiving
A5 size is set up.
A setup of the softswitch on a FAX control
circuit board is set up individually.
1-3-5
2NM/2NX/2NY/2NZ/2P0/2P6
Summary