U065/Adj Scn - Kyocera ECOSYS M3040dn Service Manual

U065 Adj Scn
Description
Adjusts the magnification of the original scanning.
Purpose
Make the adjustment if the magnification in the main scanning direction is incorrect.
Make the adjustment if the magnification in the auxiliary scanning direction is incorrect.
Caution
The magnification adjustment along the main scanning direction could cause black streaks
depending on the content of the original document.
Adjust the magnification of the scanner in the following order.
U065 (
main scanning
(P.1-3-27)
Method
1. Press the start key.
2. Press the system menu key.
3. Place an original and press the start key to make a test copy.
4. Press the system menu key.
5. Select the item to be adjusted.
Display
Main Scan
Sub Scan
Adjustment: Main Scan
1. Change the setting value using the cursor right/left keys or numeric keys.
For copy example 1, increase the value. For copy example 2, decrease the value.
Increasing the setting enlarges the image and decreasing it narrows the image.
2. Press the start key. The value is set.
direction) -------- U065 (
Description
Scanner magnification in the main
scanning direction.
Scanner magnification in the auxiliary
scanning direction.
Original
auxiliary scanning direction
(P.1-3-27)
Setting
range
-75 to 75
-125 to 125
Copy
Copy
example 2
example 1
Figure 1-3-5
1-3-27
2NM/2NX/2NY/2NZ/2P0/2P6
)
Initial Change in
setting value per
step
0 0.02%
0 0.02%