U411/Auto Adj Scn - Kyocera ECOSYS M3040dn Service Manual

U411 Auto Adj Scn
Description
Uses a specified original and automatically adjusts the following items in the scanner and the DP
scanning sections.
Scanner section: Original size magnification, leading edge timing, center line, input gamma, input
gamma in monochrome mode and matrix.
DP scanning section: Original size magnification, leading edge timing, center line.
Purpose
To perform automatic adjustment of various items in the scanner and the DP scanning sections.
Method
1. Press the start key.
2. Select the item. The screen for executing is displayed.
Display
(No Action) *1 -
Table
DP
All
Target
*1: Basic model only
Description
Automatic adjustment in the scanner sec-
tion.
Original size magnification, leading edge
timing, center line, input gamma, input
gamma in monochrome mode and matrix.
Automatic adjustment in the DP scanning
section.
Original size magnification, leading edge
timing, center line.
Performs automatic adjustment in the DP
scanning section following automatic
adjustment in the scanner section.
Set-up for obtaining the target value
Original to be used for adjustment
-
302NM94340
302NM94330
302NM94340
302NM94330
302NM94340
302NM94330
1-3-54
2NM/2NX/2NY/2NZ/2P0/2P6-1
(P/N)