Kyocera ECOSYS M3040dn Service Manual page 313

3. Pull the imaging unit forward.
4. Release the hook and then remove the
container guide by sliding backwards.
5. Pull the connector out.
6. Release the lock lever and then remove
the developer unit upward.
7. Check or replace the developer unit and
refit all the removed parts.
Container guide
Hook
Imaging unit
Developer unit
Connector
1-5-31
2NM/2NX/2NY/2NZ/2P0/2P6
Figure 1-5-51
Lock lever
Figure 1-5-52