Kyocera ECOSYS M3040dn Service Manual page 309

10. Remove two screws.
11. Remove the top tray cover upward.
12. Pull the connector and FFC from control
PWB out.
13. Pull the connector and FFC out through
the apertures.
14. Remove four screws and then remove
the laser scanner unit upward.
15. Check or replace the laser scanner unit
and refit all the removed parts.
Screw
Figure 1-5-44
Screw
Laser
scanner unit
Control PWB
Apertures
YC16
FFC
YC15
Connector
Figure 1-5-45
1-5-27
2NM/2NX/2NY/2NZ/2P0/2P6
Top tray cover
Screw
Screw
Screw
Screw