U612/System Setting 3 - Kyocera ECOSYS M3040dn Service Manual

U612 System Setting 3
Description
Makes settings for fax transmission regarding operation and automatic printing of the protocol list.
Method
1. Press the start key.
2. Select the item to be set.
Display
Auto Reduct
Protocol List
Selecting if auto reduction in the auxiliary direction is to be performed
Sets whether to receive a long document by automatically reducing it in the auxiliary direction or at
100% magnification.
1. Select the setting using the cursor right/left keys.
Display
On
Off
* : Initial setting: On
2. Press the start key. The setting is set.
Setting the automatic printing of the protocol list
Sets if the protocol list is automatically printed out.
1. Select the setting using the cursor right/left keys.
Display
Err
On
Off
* : Initial setting: Off
2. Press the start key. The setting is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Selects if auto reduction in the auxiliary direction is to be performed.
Sets the automatic printing of the protocol list.
Auto reduction is performed if the received document is longer than the
fax paper.
Auto reduction is not performed.
The protocol list is automatically printed out after communication only if a
communication error occurs.
The protocol list is automatically printed out after communication.
The protocol list is not printed out automatically.
1-3-71
2NM/2NX/2NY/2NZ/2P0/2P6
Description
Description
Description