Panasonic KX-TD816 Installation Manual page 262

42
l
Manager Programming
006
Operator /Manager Extension Assignment
Description
Assigns the jack number for a manager and/or operators. The
manager extension can perform System Programming. Operator
1
has the ability to perform operator services.
Selection
Default
Programming
Conditions
Feature References
l
OPE-1 (operator 1) / OPE-2 (operator 2) / MNGER (manager)
l
Jack number: KX-TD8 16; 01 through 16
KX-TD 1232; 01 through 64
Operator
1 -
Jack 01;
Operator 2 and Manager - Not stored
1.
2.
3.
4.
5.
6.
7.
Enter 006.
Display: OperatoriYanager
Press NEXT to program operator 1.
Display: OPE-1:JacXOl
To program another item, you can also keep pressing NEXT or PREV
until the desired one is displayed.
Enter a jack number.
To delete the current entry. press CLEAR.
To change the current entry. press CLEAR and the new jack number.
Press STORE.
To program another item, press NEXT or PREV.
Repeat steps 3 through 5.
Press END.
l
Up to two operators and a manager can be programmed.
l
In the case of XX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
l
The manager cannot be assigned the jack number of the DSS Console
Port set in program [007] "DSS Console Port and Paired Telephone
Assignment."
l
If the assigned jack is in extra Device Port mode, the proprietary
telephone jack is treated as the manager / operator extension.
l
If there is no operator or manager. press CLEAR
at step
3.
Section 3, Features,
Manager Extension
Operator
System Programming
4-25