Disa Dtmf Repeat - Panasonic KX-TD816 Installation Manual

49
l
Resource Programming
812
DISA DTMF Repeat*
Description
Selects whether the system transmits DTMF signals directly to the
central office (CO) or if the system repeats the DTMF signals to
CO in order to adjust gain. This can be done for a DISA CO-to-CO
call during dialing and / or during an established call.
Selection
l
Dial (during dialing) / Call (during an established call)
l
Mode: Repeat / Through
Default
Dial and Call - Repeat
Programming
1.
2.
3.
4.
5.
6.
7.
8.
Enter 812.
Display: DISA DTMF Repeat
Press NEXT to program the mode during dialing.
To program the mode during an established call, press NEXT again.
Display example: Dial:Repeat
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press NEXT to program the mode during an established call.
Display example: Call:Repeat
Keep pressing SELECT until the desired selection is
displayed.
Press STORE.
Press END.
Conditions
None
Feature References
Section 3, Features,
Direct Inward System Access (DISA)
*: Available for KX-TD1232 only.
System Programming
4-125