Panasonic KX-TD816 Installation Manual page 282

43
l
System Programming
VM
shtU~
DTMF Set
(contd.)
113
3. Enter a
DTMF signal number.
To
delete the current entry, press CLEAR.
To
change the current entry, press CLEAR and the new number.
4. Press
STORE.
5.
To program another selection, keep pressing
NEXT
or
PREV
until the desired selection is displayed.
6.
Repeat steps 3 through 5.
Conditions
7.
Press
END.
l
A DTIUF signal number can have a maximum of three digits, consisting
of 0 through 9, * ,
#
and PAUSE.
l
The DTMF signals are sent to the extensions in the extension group that
is assigned as "VM" or "AA" in program [ 1061 "Station Hunting
Type."
Feature References
Section 3, Features,
Voice Mail Integration
System Programming
4-45