S
3
Features
Detailed information and programming instructions are described
in the User Manual, Station Programming.
Conditions
During Station Programming, the PT is considered to be in busy status.
Programming References
Station Programming
. . ..*.*........*.......................................
User Manual
Operator Service Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Manual
Remote Station Lock Control
Feature References
None
Operation References
Not applicable.
Station Programming Data Default Set
Description
Allows the proprietary telephone user to return all the following
items programmed on the telephone to default setting.
Programming
Iteins
Call Waiting Tone Type Assignment
Full One-Touch Dialing Assignment
Handset / Headset Selection
Intercom Alerting Assignment
Preferred Line Assignment - Incoming
Preferred Line Assignment - Outgoing
Default
Tone 1
On
Handset
Tone Call
Ringing Line
Intercom Line
Station Programming is used to set or cancel these items at
individual telephones.
Conditions
None
Programming References
Station Programming
. . . . . . . . . ..*...........................................
User Manual,
Station Programming Data Default Set
Feature References
Section 3, Features,
Station Programming
Operation References
Not applicable.
3-l 12
Features