Pulse To Tone Conversion; Redial, Automatic - Panasonic KX-TD816 Installation Manual

Features
PR
Conditions
When a two-party call is changed to a three-party call and vice versa, a
confirmation tone is sent to ail three parties. Eliminating the tone is
programmable.
Programming References
Section 4, System Programming,
[990] System Additional Information, Field (13)
Feature References
Section 3, Features,
Privacy, Automatic
Operation References
DPT Features,
-User Manual
privacy Release
Pulse
to Tone Conversion
Description
This
feature allows the extension user to change from pulse dial to
tone (DTMF) dial so that the user can access special services such
as computer-accessed long distance call.
Conditions
l
This feature works only on CO lines set to Pulse Dialing mode or Call
Blocking mode.
l
Dial Type Selection provides selection of a dial mode for each CO line.
l
This feature is unavailable to DISA* callers.
l
Changing tone to pulse is not possible.
Programming References
Section 4, System Programming,
[402] Dial Mode Selection
Feature References
Sectjon 3, Features,
Dial Type Selection
Operation References
DPT Features, SLT Features;
-User Manual
Pulse to Tone Conversion
Redial, Automatic
Description
This is a special feature for the proprietary telephones, that
provides automatic redialing of the last dialed, saved number or
call log, if the called party is busy. If the Last Number Redial,
Saved Number Redial or Call Log operation is performed
handsfree, the telephone set will hang up and try again after a pre-
determined period of time.
*: Available for KX-TD 1232 only.
Features 3-99