Panasonic KX-TD816 Installation Manual page 443

I24
43 0 System Programming
Phantom Extension Number Assignment
Description Assigns the phantom numbers. Each number will be assigned to a
flexible CO or DSS button and used as a Phantom button.
Selection
l
Location number: 001 through 128
l
Phantom number: 2 through 4 digits
Default
All locations - Not stored
Programming 1.
2.
3.
4.
5.
6.
7.
8.
I Enter 124.
Display: 124 PHANTOM #
Press NEXT.
Display
:
Location NO?+
Enter a location number.
To
enter location number 001,
you can
also press
NEXT.
Display example: 001: Not Stored
Enter a phantom number.
To delete the current entry, press
CLEAR.
To change the current entry, press
CLEAR
and enter the new number.
Press STORE.
To program another location, press NEXT or PREV, or
SELECT and the desired location number.
Repeat steps
4
through 6.
Press END.
Conditions
l
There is a
maximum of 128 phantom numbers. Each number has two to
four digits, consisting of numbers 0
through
9.
l
The
first one or two digits of the phantom extension numbers are
.-
subject to program [ 1001 "Flexible Numbering, (0 i) through ( 16) 1 st
through 16th hundred extension blocks."
l
Phantom extension numbers and other extension iiumbers should be
unique. Double entry and incompatible entry for these numbers are
invalid. Valid entry example: 10 and
11,
10 and 110, Invalid entry
example: 10 and 106,2 10 and 2 1.
In order not to make an invalid entry, check the other extension
numbers in programs [003] "Extension Number Set,"
[ 1181
"VM
Extension Number Assignment" and [8 131 "Floating Number
Assignment."
Feature References
Section 3, Features,
Phantom Extension
56