Panasonic KX-TD816 Installation Manual page 287

200
44
l
Timer Programming
Hold Recall Time
Description
Assigns the length of the hold recall timer. This timer is used to
alert an extension that a call has been held for an extended period
of time.
Selection Time (seconds): 0 through 240 (O=Hold Recall disabled)
Default
60 s
Programming
1.
2.
3.
4.
5.
Enter 200.
Display: Hold Recall Time
Press NEXT.
Display example: Time: 60 set
Enter the time.
To
change the current entry, press CLEAR and the new time.
Press STORE.
Press END.
Conditions
l
Select "0" if Hold Recall is not required.
l
You cannot leave the entry empty.
Feature References
Section 3, Features,
Hold Recall
4-50
System Programming