Extension-To-Co Line Call Duration Limit - Panasonic KX-TD816 Installation Manual

47
l
COS Programming
502
Extension-to-CO Line Call Duration Limit
-.
Description
This program allows you to restrict the duration of CO calls on a
Class of Service (COS) basis.
Selection
l
COS number:
1 through 8, * ( *
=a11 COS)
l
Disable
(no limit) /
Enable
(limit)
Default
All COS - Disable
Programming 1.
Enter 502.
Display: CO Durat. Limit
y
'
Conditions
2.
3.
4.
5.
6.
7.
8.
Press
NEXT.
Display: cos NO?->
Enter a COS
number.
To
enter COS number 1, you can also press NEXT.
Display example: COSl:Disable
Keep pressing
SELECT
until the desired selection is
displayed.
Press
STORE.
To program another COS. press
NEXT
or
PREV,
or
SELECT
and the desired COS
number.
Repeat steps 3 through 6.
Press
END.
l
A CO call originated or answered by the programmed extension user
is
disconnected when the time specified in program [205] "Extension-to-
CO Line Call Duration Time" expires.
l
Extensions in the limited classes cannot establish a CO-to-CO call, that
is, cannot transfer / forward a CO call to another CO line or perform an
Unattended Conference.
l
To assign all COS to one selection, press the * key at step 3. In this
case, the display shows the contents programmed for COS 1.
l
Program [601] "Class of Service" is used to assign a Class of Service to
each extension.
l
Program [990] "System Additional Information, Field (12)" is used to
program Limited Call Duration to be done for outgoing calls only.
Feature References
Section 3, Features,
Call Forwarding - to CO Line
Call Transfer, Screened - to CO Line
Conference, Unattended
Limited Call Duration
System Programming 4-97