Panasonic KX-TD816 Installation Manual page 456

49 0
Resource Programming
802
System Data Printout
Description
Starts
or stops printing the system data. All or a specific range of
the current system-programmed data is printed out. The ranges are
as follows:
Manager
:
Manager Programming [000] through [OOS]
System
:
System Programming
[
1001 through
[
1271
Timers
:
Timer Programming [200] through [219]
TRS/ARS
:
TRS/ARS Programming [300] through [334]
CO
line
: CO Line Programming [400] through [417]
cos : COS Programming [500] through [508]
Extension
:
Extension Programming [600] through [6 IO]
Resource
:
Resource Programming [800] through [8 151
Option
:
Option Programming [990] through [992]
Selection
l
Printout range number:
* (All) / 0 (Manager) /
1
(System) /
2
(Timer) /
3 (TRSIARS) / 4 (CO line) / 5 (COS) / 6 (Extension) /
8 (Resource) / 9 (Option)
l
Start/Stop
Default
Not applicable.
Programming 1.
Enter 802.
Display: 802 DATA DUMP
2.
Press
NEXT.
Display: Enter range ?d
3.
Enter a
printout range number
or * for "All."
Display: Print-Out:Start
4.
Press
STORE
to start printing.
Printing starts.
To
stop printing, press SELECT and go to step 4.
When printing is completed, the display shows:
Display
:
Print-0ut:Finish
C.
5.
Press
STORE.
Display: Print-Out:Stop
6.
Press
END.
69