Panasonic KX-TD816 Installation Manual page 326

45
l
CO Line Programming
411
Host PBX Access Codes
Description
Assigns Host PBX or Centrex access codes. If the system is
installed behind a host PBX or a Centrex system, an access code is
required to make a CO / Centrex call or to access Centrex features.
Up to four codes can be stored for a CO line group assigned the
line.
Selection
l
CO line group (TRG) number: 1 through 8, *
( * =a11 CO line groups)
l
Access code: 1 or 2 digits, four different entries (max.)
Default
All CO line groups - Not stored
3 Programming
1.
2.
3.
4. Enter an access code.
5.
6.
7.
Display example: TRG1:01,08,10,22
Press STORE.
To program another CO line group, press NEXT or PREV, or
SELECT and the desired CO line group number.
8. Repeat steps 4 through 7.
9. Press END.
Enter 411.
Display
:
TRG Host PBX NO.
Press NEXT.
Display
:
TRK GRP NO?->
Enter a CO line group number.
To
enter CO line group number 1, you can also press NEXT.
Display example: TRGl:
, , ,
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new access code.
Display example: TRGl:Ol,
, ,
To enter more access codes for the same CO line group, press
+ and enter the access codes until all the required entries are
completed.
System Programming
4-89