120
43
l
System Programming
User Password
Description
Assigns the password required for entering the User Programming
mode.
In the User Pjrogramming Mode, any display digital proprietary
telephone user in the system can set the following programs:
[000] Date and Time Set
[OOI] System Speed Dialing Number Set
[OOZ] System Speed Dialing Name Set
[003] Extension Number Set
[004] Extension Name Set
[005] Flexible CO Button Assignment
[006] Operator/Manager
Extension Assignment
[007] DSS Console Port And Paired Telephone Assignment
[OOS] Absent Messages
[009] Quick Dial Number Set
Selection
Default
Programming
Password: 4
through 7 digits
1234
1.
Enter 120.
Display:
120 USR PASSWORD
2.
Press
NEXT.
Display
example:
Password:1234
3.
Enter a
password.
To change the
current entry, press CLEAR
and
enter the new
password.
4.
Press STORE.
5.
Press
END.
Conditions
l
The password can be from four to seven digits long. Valid numbers are
from
0
to 9.
l
If less than four digits are entered, they will not be stored.
l
You cannot leave the entry empty.
Feature References
None
52