Ringing, Discriminating; Ringing Tone Selection For Co Buttons - Panasonic KX-TD816 Installation Manual

-.
3
Features
R
Ringing, Discriminating
Description
Allows the extension user to identify the incoming call by the
ringing pattern. (See Section 5.1 "Tone / Ring Tone.")
Conditions
.
._
ci?
:
.
Programming References
No Programming required.
Feature References
Section
3,
Features,
Ringing Tone Selection for CO Buttons
Operation References
Not applicable.
Ringing Tone Selection for CO Buttons
When there are multiple incoming calls and the extension goes from
off-hook to on-hook, the calls are rung according to the following
priority:
cl> Consultation Hold Recall
c2> An incoming call from a line in which the Prime Line
Preference - Incoming function has been set (with a
proprietary telephone only)
<3> Call Waiting
c4> Incoming calls; Hold Recall; Transfer Recall; Unattended
Conference Recall
If multiple incoming calls arrive at an on-hook extension
simultaneously, priority as to which calls should be rung is generally
on a "first-come first-served" basis. In the case of proprietary
telephones (PT), however, when the Prime Line Preference - Incoming
function has been set, this line takes precedence.
Incoming TAFAS calls can be identified by ringing signals sent out
from external pager. The ringing pattern is the same as the CO calls.
The digital PT user can select a desired tone frequency for each CO
button.
Description
Allows the digital proprietary telephone user to select the desired
ringer frequency for each CO button. This provides discrimination
of incoming CO calls.
Conditions
There are eight ringer frequencies available. One of them can be assigned
to a CO button that is assigned as each of the following buttons: Single-
CO, Group-CO, or Loop-CO button. It is not possible to assign a ringer
frequency to any other button.
Features 3-103