Panasonic KX-TD816 Installation Manual page 464

4.10 Option Programming
990
System Additional hformation
(contd.)
Explanation for Fields (lo), (27), (30) through (46)
Ares
01
Field
Description
Selection Default
References
(10)
(27)
Replaced by fields (35) and (36).
Enables or disables the CO pulse
feedback tone.
Enables or disables the automatic time
adjustment by Caller ID information
once a day.
Have an option to restrict the DISA CO-
to-CO extending time. 10 attempts are
allowed.
04 D : disable
1
:
enable
b : enable
1
:
disable
None
05
(30)
Caller ID
1
(31)
(32)
(33)
(36)
1: lOtimes
1
:
no limitation
Direct Inward
System Access
:DIS A)
Direct Inward
System Access
[DISA)
Direct Inward
System Access
:DIS A)
Outgoing
Message (OGM
Voice Mail
lntegration
1 : disable
1 :
enable
1
Enables or disables retry by dialing "X "
during DISA CO-to-CO calling.
Selects the result when a call from DISA
arrives at a DND extension or a busy
extension which disabled Call Waiting.
Sets the time the system waits before
IRNA after the OGM.
Selects the result when a CO call is
routed by Call Forwarding to a voice
mail port which is in AA service mode.
(For both Inband and DFT Integration)
disable: AA service mode
enable : The mode will change to the
VM service mode and a
Follow-On ID is sent.
When the voice mail port is in VM service
mode, this program is not affected.
Selects the result when a CO call is
routed to a voice mail port by IRNA.
(For both Inband and DIT Integration)
When the voice mail port is in VM
service mode;
enable
:
VM service mode
disable: The mode will change to the
AA service mode. (Only when
Inband)
When the voice mail port is in AA service
mode;
enable : The mode will change to the
VM service mode and a
Follow-On ID is sent.
disable: AA service mode
I
3 : IRNA
1: busy tone is
sent
1: immediately
1 :
after 5 seconds
1: disable
1
:
enable
1: enable
1
:
disable
1 Voice Mail
Integration
77