Panasonic KX-TD816 Installation Manual page 409

P
3 Features
Phantom Extension
Description
Allows the system to route the calls to a phantom extension. The
call to a phantom extension arrives at the extension who has the
corresponding
Phantom button. A phantom button can be assigned
by Station Programming.
Conditions
.
Types of calls whose destination can be the phantom extension are:
.
Outside calls - DIL 1:
1;
DISA; IRNA; UCD-Overflow
Intercom calls - Extension; Transfer
You can call the phantom extension by pressing the Phantom button or
by dialing the phantom extension number. If several extensions have
the same phantom extension number, they will ring simultaneously.
A phantom number must be assigned by System Prog-ramming before
assigning the Phantom button by Station Programming.
There is a maximum of 128 phantom numbers. Each number has two to
four digits, consisting of numbers 0
through 9.
The
phantom number cannot be used for feature settings such as Call
Forwarding.
T'he lighting patterns and status of the Phantom button are shown below.
lighting pattern Phantom Extension Status
Off
Idle
Red on
Calling a phantom extension
Green rapid flash Incoming call
1
l
A DSS button can be assigned as the Phantom button so that the
operator can use the button for transferring a call.
Programming References
Section 4, System Programming,
[
1241 Phantom Number
Assignment
Station Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Manual,
Flexible Button Assignment - Phantom Button
Feature References
None
Operation References
DPT Features, SLT Features;
-User Manual
Phantom Extension
22