102
43 .
System Programming
Day / Night Service Starting Time
(c0ntd.j
8.
Press SELECT for
AM
or
PM.
9.
Press
STORE.
10.
To
program another day / night mode or day of the week,
press NEXT or PREV,
or SELECT
and the day of the
week selection number.
11.
Repeat steps 4 through 10.
12.
Press END.
Conditions
To
select the desired day, you may keep pressing
NEXT
at step
3. To
assign every day of the week to one selection, press the * key at step
3.
In this case, the display shows the contents programmed for Sunday.
If
day /night switching is unwanted, select "Disable " at step
4.
You
cannot leave the entry empty.
Feature References
Section 3, Features,
Night Service
4-34
System Programming