802
49 0
Resource Programming
System Data Printout
:
Description
Selection
Default
Programming
Starts or stops printing of the system data. All the current systeni-
programmed
data is printed out.
start / stop
Not applicable.
1.
2.
Enter 802.
Display:
System Data Dump
Press
NEXT.
Display
:
Print-0ut:Start
Press STORE
to start printing.
Printing
starts.
3.
4.
5.
Conditions
To stop printing in the middle of printing. press SELECT and go to
step 4.
When printing is completed, the display shows:
Display
:
Print-0ut:Finish
Press STORE.
Display
:
Print-0ut:Stop
Press END.
It is necessary to connect a printer to the EIA (RS-232C) port provided
on the system.
After connecting a printer, do not press the RETURN key, if provided
on the printer, for 10 seconds. Otherwise, the usage of the EIA port is
changed to system programming and printout will not occur.
You may stop printing by pressing the END button, while records are
being printed out.
You cannot restart the printout while records are being output.
Feature References
Section 3, Features,
Station Message Detail Recording
(SMDR)
4-1.16
--
System Programming
-