Panasonic KX-TD816 Installation Manual page 432

43 0
System Programming
108
Automatic Hold by CO / DSS Button
Description
Enables or disables automatically holding a CO call when a DSS
button on the DSS Console or proprietary telephone, or a CO
button on a proprietary telephone is pressed. Through this
assignment, each button acts as follows:
- Pressing the DSS button holds a CO call and quickly transfers it
to an extension without pressing the TRANSFER button.
- Pressing another CO button holds the current CO call.
Selection
Default
DSS button - Enable, CO button - Disable
Programming
1.
2.
3.
4.
5.
6.
7.
Enter
108.
Display:
108
AUTO HOLD
Press
NEXT
to program the DSS button.
Display example: DSS XFER:Enable
l
Button: DSS or CO
l
Enable / Disable
Keep pressing
SELECT
until the desired selection is
displayed.
Press
NEXT
to program the CO button.
Display example: CO Hold:Disable
Keep pressing
SELECT
until the desired selection is
displayed.
Press
STORE.
Press
END.
Conditions
This assignment applies to all DSS and CO buttons on all DSS Consoles
and proprietary telephones in the system.
Feature References
Section 3, Features,
Automatic Hold by CO Button
One-Touch Transfer by DSS Button
45