Panasonic KX-TD816 Installation Manual page 289

202
44
0
Timer Programming
Call Forwarding - No Answer Time
Description
Sets the number of rings for the Call Forwarding - No Answer
feature.
If a call is not answered before the programmed number of
rings, the call is forwarded to the destination.
Selection
Number of rings: 1 through 12
Default
3 rings
Programming
1.
2.
3.
4.
5.
Conditions
Enter 202.
Display: No Answer Time
Press
NEXT.
Display example: Time: 3 rings
Enter the number of rings.
To
change the current entry, press CLEAR and the new number of
rings.
Press
STORE.
Press
END.
One ring is equivalent to five seconds.
This timer is also used for Intercept Routing. If an incoming DISA*
call to the Intercept Routing destination is not answered before this
timer expires, the call will'be disconnected.
You cannot leave the entry empty.
Feature References
Section 3, Features,
Ca!l Forwarding - Busy / No Answer
Call Forwarding - No Answer
4-52
System Programming *: Available for KX-TD 1232 only.