002
42 0
Manager Programming
System Speed Dialing Name Set
Description
Assigns names to the system speed dial numbers assigned in
program [00 l] "System Speed Dialing Number Set." The large
display telephone
(RX-T7235)
shows the stored name when
performing
System Speed Dialing.
Selection
l
Speed dial number: 00
through 99
l
Name:
10 characters (max.)
Default
All speed dial numbers
- Not stored
Programming
1.
Enter 002.
Display: SPD Name Set
Conditions
2.
Press
NEXT.
Display: SPD Code?->
3.
Enter a
speed dial number.
To enter speed dial number 00, you can also press NEXT.
Display example: 00: Not Stored
4.
Enter a
name.
For entering characters, see Section 4.1.3 "Entering Characters."
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new name
5.
Press
STORE.
6.
To program another speed dial number, press
NEXT
or
PFUW,
or
SELECT
and the desired
speed dial number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Speed dial numbers are programmed
in pro,oram [OOl] "System
Speed Dialing Number Set."
There is a maximum of 100 names.
Each name has a maximum of 10
characters.
To go to another speed dial number at steps 3 through 6, press
SELECT and start with step 3.
Feature References
Section 3, Features,
Special Features for KX-T7235 -
System Speed Dialing
4-18
System Programming