Panasonic KX-TD816 Installation Manual page 315

333
45 0
TRS / ARS Programming
TRS Entry Code Assignment for Extra Table
Description This program allows you to specify the numbers for extra Denied
or Excepted Code Table for expansion.
Selection
l
Location number:
001 through 400
l
Toll call number:
10 digits (max.)
Default All locations - Not stored
Programming 1. Enter 333.
Display: TRS Extra Table
2.
Press
NEXT.
Display: Location NO?->
Conditions
3. Enter a
location number.
To enter location number 001, you can also press NEXT.
Display example: 001:Not Stored
4.
Enter a
toll call number.
To delete the current entry, press CLEAR.
To change the current entry, press CLEAR and the new number.
5.
6.
Press
STORE.
To program another location number, press
NEXT or PREV,
or SELECT
and the desired
location number.
7.
Repeat steps 4 through 6.
8. Press
END.
There is a maximum of either
420 toll call numbers for
Denied Code
Table or a maximum of
405 toll call numbers for Excepted Code Table.
Each number has a maximum of ten digits, consisting of 0
through 9,
and
* . The character " * " can be used as a wild card character.
Feature References
Section 3, Features,
Toll Restriction
4-78
System
Programming