Voice Mail Access Codes - Panasonic KX-TD816 Installation Manual

48 0
Extension Programming
.609
Voice Mail Access Codes
Description
Assigns a mailbox number for each extension, only if program
[990] "System Additional Information, Field (18)" is set to "free."
Selection
l
Jack number: KX-TD8 16; 01 through 16
(-1
/ -2),
KX-TD1232;
01 through 64 (-1 / -2),
(-1 = first part, -2 = second part)
l
Mailbox number: 16 digits (max.)
Default
All jacks - Not stored
Frogramming
1. Enter 609.
Display: Mailbox ID Code
2. Press NEXT.
Disglay: Jack NO?->
3. Enter a jack number.
To
enter jack number 01, you can also press NEXT.
To
select the second part (-2), press NEXT after entering a jack
number.
Display example: #01-1:Not Stored
4. Enter a mailbox number.
To
delete the current entry, press CLEAR.
To
change the current entry, press CLEAR and the new number.
5.
Press STORE.
6. To program another jack, press NEXT or PFUW, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press E&M).
Conditions
In the case of RX-TD 1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available. Jack
numbers in the out-of-service system are unacceptable.
For an explanation of jack numbering, see "Rotation of jack number"
on page 4-7.
The system supports a maximum of eight jacks (16 jacks during System
Connection) for connection to a Voice Processing System as the Voice
Mail or Automated Attendant ports.
Each mailbox number has a maximum of 16 digits, consisting of 0
through 9, *
, #
and
PAUSE.
To display parts of the mailbox number which have scrolled off the
display, press + or t.
Feature References
Section 3, Features,
Voice Mail Integration
System Programming 4-l 13