Panasonic KX-TD816 Installation Manual page 316

45
0
CO Line Programming
400
CO Line Connection Assignment
Description
Used to identify the CO lines which are connected to the system(s).
This prevents users from originating a call to a line which is not
connected.
Selection
l
CO line number:
KX-TDS 16;
01 through OS, *
( *
=a11 CO lines)
KX-TD1232;
01 through 24, *
( *
=a11 CO lines)
l
Connect / No Connect
Default
All CO lines - Connect
Programming 1.
2.
3.
Enter 400.
Display:
CO
Connection
Press
NEXT.
Display: C3 Line NO?->
Enter a CO
line number.
To
enter CO Line number 01, you can also press NEXT.
Display e:<z_zzgle: COOl:Connect
4.
5.
6.
Keep pressing
SELECT
until the desired selection is
displayed.
Press
STORE.
To program another CO line, press
NEXT
or
PREV,
or
SELECT
and the desired CO
line number.
7.
Repeat steps 4 through 6.
8. Press
END.
Conditions
l
In the case of KX-TD1232, COO1 through CO12 are for the Master
System and CO 13 through CO24 are for the Slave, if available.
l
To assign all CO lines to one selection, press the * key at step 3. In
this case, the display shows the contents programmed for COO 1.
Feature References
Section 3, Features,
CO
Line Connection Assignment
System Programming
4-79