45
0
TRS / ARS Programming
313
ARS Time
Description
Assigns times for the four ARS time schedules. It is possible to
split a day into four time zones (maximum) so that the least
expensive line is selected for that time. According to the service
hours and charges offered by your carriers, enter the starting time of
each zone.
Selection
Default
Programming
Conditions
l
Time schedule:
Time-A / Time-B / Time-C / Time-D
l
Time (hour)
:
1 through 12 / Disable (no
schedule)
*AM/PM
Time-A - 8:00 AM; Time-B - 5:00 PM; Time-C - 9:00 PM;
Time-D - Disable
1.
2.
Enter 313.
Display: ARS Time
Press
NEXT to
program Time-A.
Display example: Time-A: 8:00 AM
To program another time schedule, keep pressing NEXT or PREV
until the desired time schedule is displayed.
3.
Enter the hour.
To
set no schedule (Disable), press SELECT, and go to step 6.
If "Disable" is selected, pressing SELECT shows the previous stored
hour.
.4.
5.
6.
7.
To change the current entry, press CLEAR and the new hour.
Press + to select AM / PM.
Press
SELECT
for AM or PM.
Press
STORE.
To program another time schedule, keep pressing
NEXT
or
PREV
until the desired time schedule is displayed.
8.
Repeat steps 3 through 7.
9.
Press
END.
l
The times must be programmed
in
sequence from Time-A to Time-D.
Enter a starting time for each time schedule. Select "Disable" for an
unnecessary schedule.
l
You cannot leave the entry empty.
Feature References
Section 3, Features,
Automatic Route Selection (ARS)
System
Programming
4-7 1