Panasonic KX-TD816 Installation Manual page 320

45
0
CO Line Programming
.404
DTMF Time
Description
A CO line set to DTMF mode in program [402] "Dial Mode
Selection" can have two settings. This program sets the duration of
the DTMF signals sent to a CO line to DTMF mode.
Selection
l
CO line number:
KX-TD8 16;
01 through 08, * ( *
=a11 CO lines)
KX-TD 1232;
01 through 24, * ( *
=all CO lines)
l
Time (milliseconds): 80 / 160
Default
All CO lines - 80 ms
Programming 1.
Enter 404.
Display: DTMF Time
2.
Press
NEXT.
Display: CO Line NO?->
3. Enter a CO
line number.
To
enter
CO
line number
0 1, you can also
press
NEXT.
DLsglay example: Cool: 80msec
4.
Keep pressing
SELECT
until the desired selection is
displayed.
5.
Press
STORE.
6.
To program another CO line, press
NEXT
or
PFUZV,
or
SELECT
and the desired CO
line number.
7.
Repeat steps 4 through 6.
8.
Press
END.
Conditions
l
In the case of KX-TD 1232, COO 1 through CO 12 are for the Master
System and CO13 through CO24 are for the Slave, if available.
l
To assign all CO lines to one selection, press the * key at step 3. In
this case, the display shows the contents programmed for Cool.
l
The DTMF time required is determined by the CO line or PBX line.
Feature References Section 3, Features,
Dial Type Selection
System Programming
-F-83