000
42
l
Manager Programming
Date and Time Set
(contd.)
.
12.
Enter the hour.
To change the current entry, press CLEAR and enter the new hour.
1.3.
Press I,
.
14.
Enter the minute.
To change the current entry, press CLEAR and enter the new minute.
15.
Press *
.
16.
Press
SELECT
for AM or PM.
17.
Press *
.
Conditions
18.
Press
SELECT
for 12 or 24 (clock hour).
19.
Press
STORE.
20.
Press
END.
After changing an entry, you can press STORE.
You do not have
to perform the rest of the steps.
To go back to a previous field, press W
in steps 4 through 9 and steps
13 through 18.
If you hear an alarm after pressing STORE,
check that the date is valid.
The clock starts immediately
after the STORE
button is pressed.
You cannot leave an entry empty.
Program [990] "System Additional Information,
Field (30)" is used to
enable the automatic time adjustment by Caller ID information
once a
day.
Feature References
Section
3, Features,
Display, Time and Date
40