Panasonic KX-TD816 Installation Manual page 294

44 0
Timer Programming
207
First Digit Time
Description
Sets the maximum time alIowed between the start of CO dial tone
and the first digit dialed on an outgoing CO call. If an extension
user fails to dial any digits during this time, the DTMF receiver is
released.
Selection
Time (seconds): 5 through 120
Default
10 s
Programming
1. Enter 207.
Display: 1st Digit Time
2.
Press NEXT.
Display example: Time: 10 set
3. Enter the time.
To
change the current entry, press CLEAR
and the new time.
4.
Press STORE.
5.
Press END.
Conditions
l
This timer is used for
toll restriction checking.
l
You cannot leave the entry empty.
Feature References
Section 3, Features,
Toll Restriction
System Programming
4-57