Mounting Conditions Of Circuit Cards; Circuit Card Mounting Slots - NEC NEAX 2000 IPS Installation Manual

MOUNTING CONDITIONS OF CIRCUIT CARDS

This section explains the conditions for mounting circuit cards used in the system.

Circuit Card Mounting Slots

(1) Regular PIM
AC/DC
PIM
PWR
0 - 7
DC/DC
PWR
LT00-LT11 : Line/Trunk card mounting slots
AP00-AP11 : Application Processor card
mounting slots
MP12 : PN-CP24-A/CP24-B/CP24-C/CP24-D
mounting slot
FP12 : PN-CP15 mounting slot
*1 PN-CP24-A/CP24-B/CP24-C/CP24-D (MP) card is to be mounted in the MP12 slot of PIM0.
PZ-M606-A (ETHER) card is to be mounted on the PN-CP24-A/CP24-B/CP24-C/CP24-D (MP)
card.
PN-CP15 (FP) card is to be mounted in the FP12 slot of PIM2, 4, 6 according to the system con-
figuration.
Circuit Card Mounting Slots
*
3
LTC0
CHAPTER 1 GENERAL INFORMATION

MOUNTING CONDITIONS OF CIRCUIT CARDS

*
2
LTC1
LTC2
BWB
FRONT
VM : PZ-VM00/VM00-M/VM03-M/VM10-M mounting slot
PFT : PZ-8PFTB mounting slot
AC/DC PWR : PZ-PW121/PW126 mounting slot
When using the A361 PIM-DC (PIM for –48 V
DC power supply system), this slot is used for
DC/DC PWR (PZ-PW135 mounting slot).
DC/DC PWR : PZ-PW122 mounting slot
When using the A361 PIM-DC (PIM for –48 V
DC power supply system), this slot is not used.
– 45 –
*
1
LTC3
NWA-008841-001 Rev.5.0
90ch1001.fm
JULY/1/2006