NEC NEAX 2000 IPS Installation Manual page 560

• PZ-M632
SWITCH NAME
MODE
(Rotary SW)
The figure in the SWITCH NAME column and the position of
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE: When using the firmware program of SC-3150 IPS IPPAD PROG-C1 or later for the PN-
32IPLA-A card, you may set the MODE switch to 1 (Auto Negotiation OFF [100 Mbps <Full-
Duplex> fixed]). When using the firmware program of SC-3090 IPS IPPAD PROG-B1 for the
PN-32IPLA-A card, you may not set the MODE switch to 1.
SWITCH SETTING
NUMBER POSITION
0-F
0
1
3
4
2, 5-F
FUNCTION
Auto Negotiation ON
(Ethernet 10 Mbps/100 Mbps automatic
change)
Auto Negotiation OFF
(100 Mbps [Full-Duplex] fixed)
Auto Negotiation OFF
(10 Mbps [Half-Duplex] fixed)
Auto Negotiation OFF
(100 Mbps [Half-Duplex] fixed)
Not used
– 544 –
PN-32IPLA-A (IP-PAD)
NOTE
in the SETTING POSITION col-
NWA-008841-001 Rev.5.0
CHECK
90ch3004.fm
JULY/1/2006