NEC NEAX 2000 IPS Installation Manual page 558

Internet protocol server installation procedure manual
Hide thumbs Also See for NEAX 2000 IPS:
Table of Contents

Advertisement

Lamp Indications
• PN-32IPLA-A
LAMP
COLOR
NAME
RUN
Green
BL
Red
LOAD
PCON
AUX
VC3
VC2
Green
VC1
VC0
Green
• PZ-M632
LAMP
COLOR
NAME
NALM
LINK
Green
IPDL
100M
Green
TX
Green
RX
Green
COL
Yellow
Flash (120 IPM) : This card is operating normally.
OFF
: This card is not operating.
ON
: At least one line is busy.
OFF : All lines are idle.
Not used
Not used
Not used
Remains lit when the last 16 channel of IP-PAD is available without
Card No.1 of 16VCT.
Remains lit when Card No.1 of 16VCT is operating.
Remains lit when the first 16 channel of IP-PAD is available without
Card No.0 of 16VCT.
Remains lit when Card No. 0 of 16VCT is operating.
Not used
ON
: Connected to the IP network.
OFF : Not connected to the IP network.
Not used
ON
: Ethernet is operating at 100 Mbps.
OFF : Ethernet is operating at 10 Mbps.
ON
: Sending IP data
OFF : Not sending IP data
ON
: Receiving IP data
OFF : Not receiving IP data
ON
: Detecting IP data collision
– 542 –
FUNCTION
FUNCTION
PN-32IPLA-A (IP-PAD)
NWA-008841-001 Rev.5.0
90ch3004.fm

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents