NEC NEAX 2000 IPS Installation Manual page 43

Application Processor Card Name and Function
EQUIPMENT FUNCTIONAL
NAME
PN-IPTB IPT
PN-24PRTA PRT
PN-30PRTA PRT
PN-4RSTB MFR
PN-4RSTC CIR
PN-4RSTC-A CIR
PN-SC00 CCH
PN-SC01 DCH
PN-SC03-B ICH
NAME
IP Trunk Card
Provides LAN Interface, transmitting/receiving compressed voice
or signals over IP network.
Provides Auto Negotiation function (Set to ON/OFF by the switch
setting).
Used together with maximum of four 4VCT (PN-4VCTI) cards
(16-channels).
10BASE-T/100BASE-TX twisted pair cable is connected directly
to this card.
ISDN Primary Rate (23B+D) Interface Card
Provides a built-in D-channel Handler (DCH).
ISDN Primary Rate (30B+D) Interface Card
Provides a built-in D-channel Handler (DCH).
4-line MF Receiver, MFC Receiver/Sender Card
Used for MF/MFC-R2 Signaling on DID/DOD trunks.
Maximum four cards can be provided per system, including the
PN-4RSTC/PN-4RSTC-A card.
4-line Caller ID Receiver Trunk Card
Used for Caller ID (CLASS SM) on analog trunks.
Maximum four cards per system, including the PN-4RSTB card.
4-line Caller ID Receiver Trunk Card
Used for Caller ID (CLASS SM) on analog trunks.
Maximum four cards per system, including the PN-4RSTB card.
Common Channel Handler Card
Transmits/receives signals on the common signaling channel of
No. 7 CCIS.
D-channel Handler Card
Transmits/receives signals on the D-channel of ISDN Primary
Rate (23B+D) interface or WCS Roaming interface.
ISDN-channel Handler Card
Provides the D-channel signaling interface and controls maximum
four ILC cards (Layer 2 and 3).
CHAPTER 1 GENERAL INFORMATION
FUNCTION
– 27 –
EQUIPMENT NAME AND FUNCTION
Continued on next page
NWA-008841-001 Rev.5.0
90ch1001.fm
JULY/1/2006