NEC NEAX 2000 IPS Installation Manual page 40

Application Processor Card Name and Function
EQUIPMENT FUNCTIONAL
NAME
PN-30CCTA CCT
PN-CFTC CFT
PN-CFTC-A CFT
PN-DAIA-A DAIA
PN-DAIB DAIB
PN-DAIC DAIC
PN-DAID-A DAID
PN-DAIE DAIE
NAME
CCIS (2 Mbps) Trunk Card
Provides a built-in Common Channel Handler (CCH) of No.7
CCIS.
32 Party Conference Trunk Card
Maximum eight cards per system.
8/32 Party Conference Trunk Card
Maximum eight cards per system.
T1 Digital Trunk Interface (1.5 Mbps) Card for Remote PIM
Accommodates 24-channel PCM digital lines, and provides Firm-
ware Processor and BUS interface.
One through six cards must be provided at Main Site, which corre-
sponds to the number of Remote Site.
T1 Digital Trunk Interface (1.5 Mbps) Card for Remote PIM
Accommodates 24-channel PCM digital lines, and provides Firm-
ware Processor.
One card is required per Remote PIM at Remote Site.
T1 Digital Trunk Interface (1.5 Mbps) Channel Expansion Card
Accommodates 24-channel PCM digital lines.
One through twelve cards can be provided at Main Site.
Two cards can be provided at Remote Site.
E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines, and provides Firm-
ware Processor and BUS interface.
One through six cards must be provided at Main Site, which corre-
sponds to the number of Remote Site.
E1 Digital Trunk Interface (2 Mbps) Card for Remote PIM
Accommodates 30-channel PCM digital lines, and provides Firm-
ware Processor.
One card is required per Remote PIM at Remote Site.
CHAPTER 1 GENERAL INFORMATION
FUNCTION
– 24 –
EQUIPMENT NAME AND FUNCTION
Continued on next page
NWA-008841-001 Rev.5.0
NOVEMBER/15/2006
90ch1001.fm