NEC NEAX 2000 IPS Installation Manual page 245

<REC Control>
This item specifies the operation mode of a recording equipment. The following two types of
modes are available:
Manual mode:
Manual mode is available when the recording equipment has a remote connection function.
When the REC key is pressed, the system starts recording. When the REC key is pressed again,
the recording stops.
Automatic mode:
In automatic mode, the system starts/ends recording automatically when a call is connected/
disconnected. Note that the REC key is not effective in Automatic mode.
STEP1: Display Configuration Menu P2.
STEP2: Press the numeric key 1 (REC CONTROL).
STEP3: Press the desired numeric key. An asterisk (*) shows the selected number.
1. Manual mode
2. Automatic mode
STEP4: Press the SRC key. The display returns to Configuration Menu.
STEP5: Press the Answer key to update the configuration data.
When canceling update, press the Release key.
When specifying other item, press the DEST key.
When returning previous item, press the SRC key.
[CONFIG MENU P2] VER x
1: REC CONTROL
2: PAGE CONTROL
3: SUP CONNECTION
[REC CONTROL]
* 1: MANUAL
2: AUTO
[CONFIG MENU P2] VER x
1: REC CONTROL
2: PAGE CONTROL
3: SUP CONNECTION
Page 221
SRC: prev page
DEST: next page
Release: exit
Answer: update
SRC: menu
SRC: prev page
DEST: next page
Release: exit
Answer: update
– 229 –
SN716 DESKCON (DLC)
Default setting:
"1:MANUAL"
Page 225
NWA-008841-001 Rev.5.0
90ch2002.fm