NEC NEAX 2000 IPS Installation Manual page 320

Switch Settings
SWITCH NAME
SENSE
(Rotary SW)
0
1
2
3
NOTE 1
MB (Toggle SW)
ON
NOTE 2
SW1
(Piano Key SW)
OFF
4
3
2
1
ON
The figure in the SWITCH NAME column and the position of
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
NOTE 1: Set the groove on the switch to the desired position.
NOTE 2: When the power is on, flip the MB switch to ON (UP position) before plugging/unplugging the
circuit card.
SWITCH SETTING
NUMBER POSITION
For setting FP No.
0
0-3 1
2
3
4-F
UP
DOWN
1-3
OFF
ON
4
OFF
FUNCTION
Not used
For mounting this card in PIM2
For mounting this card in PIM4
For mounting this card in PIM6
Not used
For make-busy
For normal operation
Not used
For normal operation
Not used
– 304 –
in the SETTING POSITION col-
NWA-008841-001 Rev.5.0
PN-CP15 (FP)
CHECK
90ch3002.fm