NEC NEAX 2000 IPS Installation Manual page 309

Lamp Indications
LAMP
COLOR
NAME
RUN Green
SYSD Red
L0 Green
CLK IN Green
Flash (120 IPM) : On Line
Flash (slowly) : Off Line
OFF or ON : This card is not operating.
Lights momentarily when initializing this card.
Flashes while writing the system data for backup to the Flash Memory.
Lights while copying the system data from the Flash Memory to the
SDRAM.
Flashes at 240 IPM while copying the MP program from the Flash
Memory to the SDRAM.
When executing the MP program remote download to the PN-CP24-C/
PN-CP24-D card, flashes at 240 IPM while downloading the MP pro-
gram to the Flash Memory (outdated side).
[Series 3500 software required]
When executing the MP program remote download to the PN-CP24-C/
PN-CP24-D card, remains lit when the MP program downloaded to the
Flash Memory (outdated side) is completed.
[Series 3500 software required]
When executing the MP program remote download to the PN-CP24-C/
PN-CP24-D card, disappears when the program change of the Flash
Memory (outdated side) and the Flash Memory (upgraded side) is com-
pleted.
[Series 3500 software required]
When executing the MP program remote download to the PN-CP24-C/
PN-CP24-D card, flashes at 120 IPM when the MP program download
to the Flash Memory (outdated side) is interrupted/fails.
[Series 3500 software required]
When executing the MP program remote download to the PN-CP24-C/
PN-CP24-D card, flashes at 60 IPM while copying the program of
Flash Memory (upgraded side) to the Flash Memory (outdated side).
[Series 3500 software required]
When executing the MP program remote download to the PN-CP24-C/
PN-CP24-D card, flashes specially (ON : Off = 7 : 3) when the pro-
gram copy from the Flash Memory (upgraded side) to the Flash Mem-
ory (outsided side) is completed
[Series 3500 software required]
Remains lit while receiving clock signals to the PLO.
– 293 –
PN-CP24-A/PN-CP24-B/PN-CP24-C/PN-CP24-D (MP)
FUNCTION
NWA-008841-001 Rev.5.0
90ch3002.fm
JULY/1/2006