NEC NEAX 2000 IPS Installation Manual page 276

Power Failure Transfer (PFT)
(2) Installation of PZ-8PFTB
STEP1: Mount the PZ-8PFTB card into the PFT slot of the PIM.
STEP2: Connect the champ connectors of 25-pair cables to the PFT0 and PFT1 connectors on the PZ-
8PFTB card as shown below.
Connection of 25-Pair Cable and PZ-8PFTB
PFT1 CONNECTOR
CHAMP CONNECTOR ATTACHED TO PZ-8PFTB
PZ-8PFTB
PFT0 CONNECTOR
25-PAIR CABLE
To MDF
Continued on next page
– 260 –
NWA-008841-001 Rev.5.0
90ch2002.fm