NEC NEAX 2000 IPS Installation Manual page 318

]
SWITCH NAME
DK (Connector)
02
01
JP0 (Jumper pin)
Front
JP1 (Jumper pin)
Front
The figure in the SWITCH NAME column and the position of
umn indicate the standard setting of the switch. When the switch is not set as shown by the figure and
, the setting of the switch varies with the system concerned.
SWITCH SETTING
NUMBER POSITION
02 Ground detection
01 Ground sending
UP
DOWN
RIGHT
LEFT
FUNCTION
For normal operation
(Battery backup ON)
Not used
(Battery backup OFF)
For using external hold tone source
(When Pin Jack on the MP card is in
use)
For using internal hold tone source
(When Merody IC on the MP card is in
use)
– 302 –
PN-CP27-A/PN-CP27-B (MP)
in the SETTING POSITION col-
NWA-008841-001 Rev.5.0
NOVEMBER/15/2006
CHECK
90ch3002.fm